Ikegami HL-55A Camera Head Broadcast Production MB36438

Shipping Australia wide. Buy my other items and combine shipping. Pickup from 500 Elizabeth St, Surry Hills, NSW, 2010. Corner Belvoir St and Elizabeth St. Check out my other items on sale at http://clearancesale-sydney.blogspot.com/

I am selling 6x Ikegami HL-55A camera bodies. This is a listing for one. Serial MB36438 I do not have the charger so I cannot power it on. Untested and sold As-Is.

HL-55A High-Performance, Compact, Lightwight FIT CCD Camera
HL-55A with CA-95C Camera Adapter		Ikegami's new HL-55A, compact, lightweight camera, is designed for ENG and EFP use. This camera, built for rugged, professional broadcast use, employs newly developed Frame Interline Transfer (FIT) CCDs with 400,000 pixels, has absolutely no Fixed Pattern Noise (FPN), has dramatically reduced vertical smear, and enhanced resolution. The camera also contains an electronc six-speed shutter for improved dunamic resolution and slow-motion special effect. The HL-55A belongs to Ikegami's Unicam family of cameras, and is compatible with HL-55 and HL-95 accessories. Various operating systems, such as, stand-alone, on-board VCR, and multicore/triaxial cable extension can be configured around the HL-55A.

Features Compact and lightweight Use of high performance CCD pick-up devices enables lower weight and power consumption to be achieved. Weight: 3.1kg (6.8 lbs) including a viewfinder Power Consumption: 14W High resolution and high S/N ratio The high performance CCD pickup devices and most advanced circuit technology yield a substantial improvement in resolution, S/N ratio, and sensitivity. The HL-55A features a resolution of 700 horizontal lines, and a high S/N ratio of 62dB or better with performance superior to that of conventional cameras. High sensitivity The improvement in S/N ratio allows increased video gain of + 24dB, if necessary. An excellent minimum illumination of 7 lux with a- high quality image is possible. The gains on the three position selection switch can be set by internal links for values between 0 and + 24dB in 6dB steps. Dynamic DTL Dynamic DTL improves resolution and sharpness to ensure consistent images that are crisp and clear 'from center to corner. White shading correction There are white shading controls for red, green and blue. The correction level is automatically varied to give optimum correction when the lens extender is used. Multi-speed electronic shutter Featuring a multi-speed electronic shutter, the HL-55A has dynamic resolution even when shooting moving objects, such as in sporting events. Horizontal DTL Horizontal DTL correction is derived from an RGB mix making it possible to obtain sharp pictures at all times. Auto highlight compression / knee aperture correction Optimum dynamic range and excellent detail can be achieved in outdoor scenes with high contrast through auto highlight compression circuitry. The knee aperture-circuit provides additional correction to enhance resolution in the highlight areas. Optics Featuring a newly designed optical system with a high-sensitivity prism, the HL-55A has the excellent spectral characteristics of the HL- 79E and the HL-95. Ikegami's original CCD mounting technique, not only achieves precision CCD positioning, but also helps prevent from registration errors due to changes in temperature. Low-pass filter A newly developed optical low-pass filter offers considerable reduction in MOIRE, while making best use of the high modulation factor of the CCD's. Auto black balance Black level can be easily matched without instrumentation. Audio level controller VCR audio level can be adjusted as appropriate with the audio level controller, together with the audio level marker displayed in the viewfinder. VF indicators The camera and VCR operating conditions can be checked with the LEOs and character indicators in the viewfinder. VF markers Center and safety area markers can be displayed in the VF to facilitate framing the camera shot: These markers can be turned on and off as necessary. Remote control The HL-55A has a digital remote control terminal which can be used even when docked with a VCR. (The remote controller is an optional item.) VCR interface The HL-55A can be configured with on-board 1/2" broadcast VCR's, including Betacam and M II types. A compact VCR adaptor is used with the standard HL-55A to interface Betacam recorders. For dedicated camera recorder application, the HL-55A can be ordered (option) in Betacam version, eliminating the need for an adaptor. Various functions which enhance operational characteristics The HL-55A features a wide variety of additional functions including color bars, genlock circuit, and an audio monitor speaker, enabling it to be used in EFP applications as well as in ENG operation. An Auto Iris switch on the side of the camera allows the lens to be opened or closed one f stop above or below normal auto iris setting.

Specifications

[ Mechanical ]
Dimensions (WHD)	96x230x 155 mm 3.7x9.0x6.1 inches
Weight	3.1kg (6.8lbs) (with 1.5" VF)
Lens mount	Bayonet (compatible with HL-95/79E)
Optical filter	1 2 3 4 3000°K 5600°K 5600°K +1/4ND 5600°K +1/16ND
[ Electrical ]
DC input signal	12V (11-16V)
Power consumption	14W
External sync input signal for genlock	VBS 1Vp-p or BBS 0.45Vp-p
Return video signal	VBS or VS 1Vp-p
MIC input	-60dBm
Tally input	Power/Contact (with CA-95C)
Intercom	2-wire/4-wire (with CA-95C)
Gain switchable	0, +9, + 18dB (STD) 0, +12, +24dB 0, +6, + 12dB 0, +6, + 18dB * Selectable by internal links
Signal to noise ratio	62dB (NTSC)
Sensitivity	2000 lux @ f8 Under the following condition Color temperature 3200°K Reflectance 89.9% Gain 0dB Gamma Linear Aperture, Detail, Matrix All off Bandwidth 4.2MHz
Resolution	H: 700TVL V: 400TVL
Registration	0.05% or less-all zones (excluding lens)
Video output signal	VBS 1Vp-p, 75 ohm, 1 output Component output 1 ch R.G.B output 1ch
VF video	R + G + B (normal) or Monitor output signal selected by the monitor switch
Monitor output signal	R, G, B, R-G, B-G, R+G+B, ENC
Shutter speeds	1/100, 1/120,1/250, 1/500, 1/1000, 1/2000 second
CA-95C Camera Adaptor
Dimensions (WHD)	96 x 250 x 115 mm 3.8 x 9.8 x 4.5 inches
Weight	11kg. (2.4 lbs)
Input signals
External sync for genlock	VBS 1Vp-p or BBS 045Vp-p
Return video signal	VBS or VS 1 Vp-p
MIC	-70 - -50dBm 200 ohm (balanced)
DC input	12V (11-16V)
Output signals
Video	Composite video RBG video 1 output 75 ohm Component Y, R-Y, B-Y Audio -20dBm 600 ohm (balanced)
MA-95 Camera Adaptor
Input signals
Encoded video	VBS 1Vp-p composite, 75 ohm
RGB video	Each 0.7Vp-p non-composite, 75 ohm
MIC	-50dBm (600 ohm, balanced)
Incom	-10 dBs (unbalanced)
Genlock	VBS or BBS 1Vp-p (75 ohm) (option)
Weight	1.2 Kg (2.6 lbs)
Power	DC + 12V
Dimensions	(WHD) 96 X 250 X 168 mm 3.8 X 9.8 X 6.6 inches
MA-79 Base Station
Input signals
Genlock	VBS 1Vp-p or BBS 0.45Vp-p, 75 ohm/bridged
Return video	VBS 1Vp-p, 75 ohm/bridged
Incom	-10dB/600 ohm, balanced; 4-wire/2-wire
Tally	DC + 24V or Contact Closure
Output signals
Composite video	VBS 1Vp-p/VB 0.85Vp-p, 75 ohm 2 outputs RGB video Each V 0.7Vp-p, 75 ohm Monitor R,G,B,R-G,B-G,R + G + B,SEQ Audio -20dBm/600 ohm, balanced Incom -10dBm, 600 ohm, balanced, 4-wire/2-wire
Power requirement	AC100/117/220/240V 50/60Hz DC12V
Power consumption	AC150VA, DC12A (Cable 300m)
Dimensions	(WHD) 215 X 177 X 349 mm 8.5 X 7.0 X 13.7 inches
Weight	12 Kg (264 lbs)
TA-55A Base Station
Input signals
Genlock	VBS 1Vp-p or BBS 0.45Vp-p, 75 ohm/bridged
Return video	VBS 1Vp-p, 75 ohm/bridged 2 outputs (bridged)
Incom	0dBs, 10k ohm 4-wire balanced (standard) -20dBs 600 ohm 2-wire balanced (option) 1Vp-p 200 ohm unbalanced RTS switchable
Tally	Contact/Power (DC24V Max)
P.G.M	0dBs 10k ohm balanced
Output signals
Composite video	VBS 1Vp-p/VB 0.85Vp-p, (75 ohm, positive 2 outputs)
Chromakey	VS 1 Vp-p or V 0.7Vp-p (75 ohm, positive) 1 output
Audio	0dBm 600 ohm unbalanced
Incom	0dBs, 10k ohm 4-wire balanced (standard) -20dBs 600 ohm 2-wire balanced (option) 1 Vp-p 200 ohm unbalanced RTS switchable
Tally	Contact
Dimensions	(WHD) 200 X 150 X 300 mm 7.9 x 5.9 x 11.8 inches
Weight	5.5 Kg (12.1 lbs)
TA-55A Camera Adaptor
Input signals
Genlock	VBS 1Vp-p/BBS 0.45Vp-p, 75 ohm 1 output
MIC	-60dBm balanced
Output signals
Composite video	VBS 1Vp-p 75 ohm 1 output
RET	VBS 1Vp-p 75 ohm 1 output
External VTR input/output	26 pin VTR connector
Incom	Incom ENG 1 output MIC (carbon) -16dBs PHONE 0dBs
Dimensions	(WHD) 96 X 228 X 153 mm 3.8x9.0x6.0 inches
Weight	1.8 Kg (4.0 lbs)

Design and specifications are subject to change without notice.

Home | All Products | Contact | Site Map | Email this page link